team3s
Sunday, December 24
2000 Volume 01
: Number
359
----------------------------------------------------------------------
Date:
Fri, 22 Dec 2000 22:51:35 +0100
From: "Roger Gerl \(RTEC\)" <
roger.gerl@bluewin.ch>
Subject:
Re: Team3S: Re: Nippondenso injectors
> One question: Does anyone know
if the Nippondenso 720's used for our cars
is
>
the
>
EXACT same ones used in the
DSM's?
>
If so, there seems to be a lot of them for sale that
I
> can get
cheaper,
>
but I wanted to make sure first.
Are there ANY 720cc used in DSMs ?? In
general these are the same
top-feeders and the same style too but there are
different 720cc from Denso
available. What top do they have (yellow, red,
blue, brown ...) ?
Roger
93'3000GT TT
www.rtec.ch*** Info:
http://www.Team3S.com/Rules.htm
***
------------------------------
Date: Sat, 23 Dec 2000 20:38:26
-0800
From: vect0r0 <
vect0r0@ix.netcom.com>
Subject:
Team3S: URGENT: EVC 3 Vaccuum Diagram HELP!!
I just re-installed my
engine after my rod/piston upgrade. I started
the car and everything
runs great but I think that I have messed up the
EVC 3 ATM Boost-Controller
vaccuum lines.
My boost controller no longer seems to be reading plenum
pressure. If
ANYONE can help me identify where these lines go I would
be forever
greatful.
BTW: There are 2 large lines (1 and 2) and
then a small line (3) from
left to right. Please help.
Thanks in
advance....
John
*** Info:
http://www.Team3S.com/Rules.htm
***
------------------------------
Date: Sat, 23 Dec 2000 21:22:18
-0800
From: "Bob Forrest" <
bf@bobforrest.com>
Subject: Re:
Team3S: URGENT: EVC 3 Vaccuum Diagram HELP!!
Hey, JB,
Since most
folks are doin' the "holiday thing" this weekend, if you
don't get much
response, try the Search page...
www.Team3S.com/Search.htm
There are 21 entries for "vacuum lines" -
maybe one of them will have what
you need. Wish I could help more...
Now I gotta put my Santa hat back
on and get back to my party!
Happy Holidays,
everyone!
Best,
Forrest <== Ho, ho, ho...
-
----- Original Message -----
From: "vect0r0" <
vect0r0@ix.netcom.com>
To: <
team3s@stealth-3000gt.st>; <
stealth@starnet.net>
Sent: Saturday,
December 23, 2000 8:38 PM
Subject: Team3S: URGENT: EVC 3 Vaccuum Diagram
HELP!!
> I just re-installed my engine after my rod/piston
upgrade. I started
> the car and everything runs great but I think
that I have messed up
the
> EVC 3 ATM Boost-Controller vaccuum
lines.
>
> My boost controller no longer seems to be reading plenum
pressure. If
> ANYONE can help me identify where these lines go I
would be forever
> greatful.
>
> BTW: There are 2 large
lines (1 and 2) and then a small line (3) from
> left to right.
Please help.
>
> Thanks in advance....
>
>
John
>
>
> *** Info:
http://www.Team3S.com/Rules.htm
***
>
*** Info:
http://www.Team3S.com/Rules.htm
***
------------------------------
Date: Mon, 25 Dec 2000 01:33:54
EST
From:
AABOMB1@aol.comSubject:
Team3S: "soft clutch": update
Just to let everyone know, I went to a
friend's house today and we were going
to bleed the clutch; my friend took
off the rubber boot to examine the slave
cylinder and fluid just poured out.
So it obviously has busted seals; I will
be ordering a new slave cylinder
after Christmas.
Happy Holidays
'94 3000GT
NA-DOHC
AA
- -------------------
E-mail:
aabomb@thepentagon.com <or>
aabomb1@aol.comFax: (707) 982-8817 [In The
United States]
*** Info:
http://www.Team3S.com/Rules.htm
***
------------------------------
End of team3s V1
#359
*********************