team3s
Thursday, May 4
2000
Volume 01 : Number
125
----------------------------------------------------------------------
Date:
Thu, 4 May 2000 17:36:30 -0700
From: "Mohler, Jeff" <
jeff.mohler@netapp.com>
Subject:
RE: Team3S: Re: racing gas questions
The...store?
- -----Original
Message-----
From: Trevor James [
mailto:trevor@kscable.com]
Sent:
Thursday, May 04, 2000 5:21 PM
To: Matt Jannusch
Cc:
Team3S@stealth-3000gt.stSubject:
Re: Team3S: Re: racing gas questions
Where do you guys get distilled
water from?
Trevor
96 R/T TT
92 GMC Typhoon
Matt Jannusch
wrote:
> > Where are you guys plumbin in the injector for
WI?
>
> I plumbed the pressure feed and injector about one inch past
the blowoff valve
output on the Y-pipe between the BOV and the throttle body
so that water
couldn't get injected into the BOV. I put the injector
about straight-on with
the side of the Y-pipe (line running horizontal to the
ground) and the pressure
feed line about 1" down on the Y-pipe
underneath the water injector. Works
great. For the pressure
switch line you can tap off of the BOV line from the
throttle body (I have a
separate tap on the driver's side end of the intake
manifold that I used for
my boost controller for the pressure switch line).
>
> -Matt
>
'95 3000GT Spyder VR4
>
> ***Info:
www.stealth-3000gt.st/Team3S-Rules.htm***
***Info:
www.stealth-3000gt.st/Team3S-Rules.htm***
***Info:
www.stealth-3000gt.st/Team3S-Rules.htm***
------------------------------
End
of team3s V1 #125
*********************