New York - Munich - Portland - San Francisco - Seattle - Stockholm - Vancouver - Zurich
New York - Munich - Portland - San Francisco - Seattle - Stockholm - Vancouver - Zurich
Article by Jim Matthews
{click to enlarge image}
Parts to have on hand when replacing clutch and inspecting
Getrag transmission
(all purchased from Kormex and Mitsupartsdirect.com
in May 2001).
|
MR111650 |
clutch disc |
$65.29 |
|
MD742801 |
clutch cover (pressure plate) assembly |
$100.91 |
|
MB837549 |
clutch release (throw-out) bearing |
$31.56 |
|
MD120699 |
crankshaft oil (rear main) seal |
$14.69 |
|
MB670290 |
clutch (slave) cylinder assembly |
$46.67 |
| KORMEX | Seal kit (output shaft seal, both axle seals, the plug/seal for the end of tranny case that covers the input shaft retaining bolt, and both seals for the transfer case) | $75.00 |
| KORMEX | 2nd gear blocking ring (center brass part of synchro that tends to suffer the most wear) | $125.00 |
{click to enlarge image}
Set of brand new synchros for six-speed purchased in 1998
through Jack's one-time deal with Getrag
(counter-clockwise from upper-left: 1/2, 3/4, 5/6).
{click to enlarge image}
Close-up of 2nd gear blocking ring, new from Kormex for $125 (May 2001).
--- Jim Matthews
Questions about your car???
Ask the other owners--
On our FREE mailing list!
Click HERE
Article & Photos ©2000-2004 Jim Matthews, All Rights Reserved.
All Other Images ©1995-2004 Bob Forrest, All Rights Reserved.